Topic 3
Water quality monitoring using ESP32 and the Blynk platform
1. Rationale
Small supply stations rarely monitor water quality because of cost. An ESP32 with sensors and Blynk gives an online monitor for 50–60 USD.
2. Objectives
- Measure pH, TDS and turbidity
- Send data to Blynk over Wi-Fi in under 2 s
- Raise an alarm when a limit is exceeded
3. Subject and scope
Domestic water quality in the laboratory.
4. Method
- Theory (pH, TDS and turbidity sensors)
- Prototype (circuit, calibration)
- Evaluation (error against a reference meter)
5. Schedule
| Week | Work |
|---|---|
| Weeks 1-2 | Sensor purchase |
| Weeks 3-4 | Circuit and calibration |
| Weeks 5-6 | Blynk setup |
| Weeks 7-8 | Water sample trials |
| Weeks 9-10 | Report |
6. Expected results
Error below 1 % for pH, 2 % for TDS and 4 % for turbidity.